Products

  • Danalyzer RAI 1500XA

    View Data Sheet and Specs

    The 1500XA Gas Chromatograph is an air-bath style GC engineered for complex applications requiring multiple detectors and parallel chromatography. The 1500XA is ideal for your natural gas processing applications where instrument air is available and requires higher oven temperatures than are available in a heat-sink design. As with other Danalyzer’s, the 1500XA is rated for 0 to 130 °F (-15 to 55 °C) operation, providing the most stable analysis for an air-bath oven and reducing your installation and utility costs significantly.

    BTU and 0-300 PPM H2S measurements are used for EPA Federal Regulation 40 CFR part 60, subpart Ja compliance where Continuous Emissions Monitoring Systems are required by the EPA.

    Read More »

  • GSP_GC_Prev_370XA_Pole_Mounted_740x540

    The Danalyzer 370XA is designed to simplify natural gas measurement analysis in Fiscal and Custody Transfer applications and improve the measurement performance of your C6+ BTU/CV analysis.

    A unique benefit to the 370XA is its Maintainable Module™ technology, which allows the operator to easily replace the GC module in the field in under two hours, greatly reducing downtime and overall operating costs.

    For additional information, please visit RosemountAnalytical.com

    Read More »

  • GSP_GC_Prev_Model_500_740x540

    The Danalyzer 500 Gas Chromatograph is the industry’s most trusted analyzer for natural gas custody transfer applications. This air-less heat-sink style GC has a unique “open-oven” design that is also ideal for very rich gases or natural gas liquids (NGL) that require very high temperature heating for the sample lines.[…]

    Read More »

  • Model 770XA

    View Data Sheet and Specs

    The Danalyzer 700XA Gas Chromatograph is an air-less heat-sink style gas chromatograph with dual-detector/parallel analysis capabilities in a rugged explosion-proof housing suitable for installations in extreme conditions. The 700XA Gas Chromatograph provides you the most accurate custody transfer measurement available with extended analysis options (including the C9+ with hydrocarbon dew point calculations) for complex natural gas measurement.

    Read More »

  • A+ Genie Probe Regulator (GPR)

    The GPR™ consists of a housing and a membrane-tipped probe regulator. The housing is installed in a depressurized pipeline through a vertically mounted thread-o-let or flange, and contains a “foot valve” in its lower end. Inserting the probe into the housing opens the “foot valve”, allowing pipeline gas to flow[…]

    Read More »

  • davis and davis slider

    ANALYZER BUILDING: Single or Multi-Room, Class 1 Div 1,2 Analyzer Shelters/CEMS Integration Packages are delivered with full electrical, tubing and testing, ready for installation and operation. We provide technical support, start-up and commissioning services with full system documentation on every project we deliver.  

    Read More »

  • Apollo GFR Inline Gas Filter

    The GFR Series Gas Filter is a line supported unit that was designed for gas distribution applications. The single element, one entry design makes maintenance easy. Units are normally installed top up, but can be mounted in any orientation. New design incorporates element stabilization brackets to minimize extra wear on filter elements[…]

    Read More »

  • Daniel_LiquidTurbine

    Award-Winning Turbine Meters Widely preferred for their low-cost of installation, maintenance and ownership, Daniel liquid turbine flow meters offer high accuracy and repeatable measurement under the most demanding conditions of custody transfer applications. Typical installations include crude oil and refined product pipelines, marketing terminals, tank farms as well as mobile[…]

    Read More »

  • DANIEL-Relief-Valves-440x330

    Models 762, 763, 765, 766 and 767 gas loaded relief / back pressure control valves are specifically designed to regulate and control maximum pipeline pressures or to maintain a minimum back pressure in a system.

    Read More »

  • DANIEL 3414 SeniorSonic Ultrasonic Gas Flow Meter

    Next-generation technology ensures custody transfer measurement integrity Ideal for custody transfer applications, the new Daniel 3414 Four-Path Gas Ultrasonic Meterprovides highly accurate, reliable measurement that minimizes lost and unaccounted for natural gas. The four-path (eight transducer) chordal meter is now paired with rugged Daniel Gas Ultrasonic Transducers and ultra-fast next-generation Daniel[…]

    Read More »